Epson 2000 - Manual (Page 23)

Safety Instructions 2-5
R4C428_V2
long.bk
Rev_C
A5 size SAFE.FM
1/14/00 Pass 2
R Proof Sign-off:
tantoname
_______
leadername _______
editorname _______
❏ Before transporting the Stylus Scan, make sure the print head
is in the home (far right) position and the ink cartridges are
in place.
When handling the ink cartridges
❏ Keep ink cartridges out of the reach of children. Do not allow
children to drink from or otherwise handle the cartridges.
❏ If ink gets on your skin, wash it off with soap and water. If it
gets into your eyes, flush them immediately with water.
❏ Do not shake the ink cartridges; this can cause leakage.
❏ Install the ink cartridge immediately after you remove it from
its package. Leaving the cartridge unpacked for a long time
before use may result in reduced print quality.
❏ Once you install an ink cartridge, do not open the clamp or
remove the cartridge except to replace it with a new one.
Otherwise, the cartridge may become unusable.
❏ Do not use an ink cartridge beyond the date printed on the
cartridge carton. For best results, use up the ink cartridges
within six months of installing them.
❏ Do not dismantle the ink cartridges or try to refill them. Doing
so may damage the print head.
When choosing a place for the Stylus Scan
❏ Place the EPSON Stylus Scan on a flat, stable surface that
extends beyond the Stylus Scan base in all directions. The
Stylus Scan will not operate properly if it is tilted or at an
angle.
❏ Avoid places subject to rapid changes in temperature and
humidity. Also, keep the Stylus Scan away from direct
sunlight, strong light, and heat sources.