Epson 2000 - Manual (Page 180)

12-18 Troubleshooting
R4C428_V2
long.bk
Rev_C
A5 size TRBLE.FM
1/14/00 Pass 2
L Proof Sign-off:
tantoname
_______
leadername _______
editorname _______
Scanning does not begin
Try one or more of these solutions:
Nothing happens when I try to scan
If your situation is listed, try the suggested solution.
You are scanning several pages or documents
Wait until the Stylus Scan completes the current scan before
starting a new scan.
The Stylus Scan is busy
Some documents take a long time to scan, especially when the
scan is optimized for photos.
The document has jammed
Turn off the Stylus Scan and close any open applications on your
computer. Remove all jammed documents from the Stylus Scan,
then turn the Stylus Scan back on.
The scanned image is blank
Make sure that the image you want to scan is inserted face down
into the document feeder.
Something is missing or incorrect in the scanned image
Try the solutions listed for the following image correction
problems.
Text is missing or is incorrectly recognized by OCR
Try adjusting the scan threshold on the OCR Line/Art menu in
the EPSON Stylus Scan SF TWAIN setup dialog box. Select the
threshold radio button and adjust the slider to change the scan
threshold.