Changed functions of software 340 55x-04 – HEIDENHAIN TNC 320 (340 55x-05) User Manual
Page 10
10
Chang
e
d F
u
nctions of Sof
tw
a
re
340
55x
-04
Changed Functions of Software
340 55x-04
In Cycle 22 you can now define a tool name also for the coarse
roughing tool (see User's Manual Cycles).
The additional status display has been revised. The following
improvements have been made (see "Additional status displays" on
page 67):
A new overview page with the most important status displays
was introduced.
The tolerance values set in Cycle 32 are displayed.
The pocket-, stud- and slot-milling cycles 210 to 214 were removed
from the standard soft-key row (CYCL DEF >
POCKETS/STUDS/SLOTS). For reasons of compatibility, the cycles
will still be available, and can be selected via the GOTO key.
With Cycle 25 Contour Train, closed contours can now also be
programmed.
Tool changes are now also possible during mid-program startup.
Language-sensitive texts can now be output with FN16 F-Print.
The soft-key structure of the SPEC FCT function was changed and
adapted to the iTNC 530.