HEIDENHAIN iTNC 530 (340 49x-05) Pilot - Manual (Page 70)

70
Definin
g
Machining Operations
Additional parameters on the tool detail form:
 DL : Delta length for tool T
 M function : Any miscellaneous function M
 Tool preselect : If needed, this is the number of the next tool for faster
tool change (machine-dependent)
Additional parameters on the drilling parameters detail form:
 None.
Globally effective parameters on the global data detail form:
 Set-up clearance
 2. Set-up clearance
 Feed rate for positioning
 Dwell time at depth
 Retraction feed rate
 Feed rate for traversing between machining positions