HEIDENHAIN TNC 640 (34059x-04) - Manual (Page 626)

Tables and overviews
19.1 Machine-specific user parameters
19
626
TNC 640 | User's Manual
HEIDENHAIN Conversational Programming | 3/2014
Parameter settings
CfgToolMeasurement
M function for spindle orientation
-1: Spindle orientation directly by NC
0: Function inactive
1 to 999: Number of the M function for spindle orientation
Probing direction for tool radius measurement
X_Positive, Y_Positive, X_Negative, Y_Negative (depending on the tool axis)
Distance from lower edge of tool to upper edge of stylus
0.001 to 99.9999 [mm]: Offset of probe contact to the tool
Rapid traverse in probing cycle
10 to 300 000 [mm/min]: Rapid traverse in probing cycle
Probing feed rate for tool measurement
1 to 3 000 [mm/min]: Probing feed rate for tool measurement
Calculation of the probing feed rate
ConstantTolerance: Calculation of the probing feed rate with constant tolerance
VariableTolerance: Calculation of the probing feed rate with variable tolerance
ConstantFeed: Constant probing feed rate
Max. permissible surface cutting speed at the tooth edge
1 to 129 [m/min]: Permissible rotational speed at the circumference of the milling tool
Maximum permissible speed during tool measurement
0 to 1 000 [1/min]: Maximal permissible speed
Maximum permissible measuring error for tool measurement
0.001 to 0.999 [mm]: First maximum permissible error of measurement
Maximum permissible measuring error for tool measurement
0,001 to 0,999 [mm]: Second maximum permissible error of measurement
Probing routine
MultiDirections: Probing from multiple directions
SingleDirection: Probing from one direction