ShoreLand'r TA0010 - Manual

Midwest Industries, Inc. Ida Grove, IA 51445 800.859.3028 www.shorelandr.com
M404195
®
TA0010
Bow Pad Support for Fishing Series Trailers
The TA0010 Bow Support Pad is used to add additional support to the keel of your boat in the area over the tongue. It is adjustable forward
and backward as well as up and down. It can be raised to the proper height to support your boat.
It also serves as a broader area for your boat to rest on, especially a flat bottom boat when it is being loaded. Once loaded the boat can
be shifted to the center line of the keel rollers for proper support. At that time the bow support pad acts as an additional support for the
keel of the boat similar to a keel roller.
Assembly Instructions:
Open the hardware box and sort all items by
size.
Locate the rear cross member pad (Item #10).
Place it on the top of the formed pad support
channel. Drop the pad into the support channel
so that the center plastic ring of the pad fits in
the hole of the channel. Place the assembly onto
the support mounting bracket as shown. Attach
the pieces together with a 3/8” X 1-1/2” carriage
bolt down from the top. Secure to the support
mounting bracket by first installing Item No. 3, cup
washer and then a flat washer. Place on a 3/8”
lock washer and hex nut. Tighten.
The assembly is attached to the tongue with two
3/8” X 4” carriage bolts, one on each the top and
bottom side of the tongue. They are secured in
place with 3/8” flange lock nuts provided.
Note that the assembly is adjustable both up and
down as well as being able to be slid forward and
backward on the tongue. Adjust to its proper posi-
tion. Secure in place by tightening the bolts just
installed. Assembly is complete.