Ice machines sizing guide, Evp123, Single ice makers – Everpure QC7I Single-MH2 User Manual

Page 47: Ice makers, Single pf-i2000, System

Advertising
background image

Customer Service Email: cseverpure

@

pentair.com

n

Technical Support Email: servicespecialist

@

pentair.com

45

EVP123

*For chloramine removal, contact Everpure Technical Service. For assistance with any ice maker not listed here, call Everpure at 800.942.1153

MicroPure II – A precoat filter with AgION antimicrobial compound that inhibits the growth of

bacteria. As water passes through the filter, the carbon adsorbs chlorine, off-tastes and odors, and

AgION works to inhibit any bacterial growth.

Ice Machines Sizing Guide

Single Ice Makers

EV9324-21 Insurice

®

Single PF-i2000

2

System

Built-in prefilter removes sediment and coarse dirt particles

ƒ

Cubers: <650 lbs/day
IMI Cornelius, Manitowoc, Follett,
Ice-O-Matic

ƒ

Flakers: <1500 lbs/day
IMI Cornelius, Manitowoc, Follett,
Ice-O-Matic, Scotsman

Replacement Cartridges

ƒ

EV9534-26 EC210
Prefilter (1 ea)

ƒ

EV9612-22 i-2000

2

System available without prefilter: EV9324-01 Insurice Single

EV9324-22 Insurice Twin PF-i2000

2

System

Built-in prefilter removes sediment and coarse dirt particles

ƒ

Cubers: 650–1200 lbs/day
IMI Cornelius, Manitowoc, Follett,
Ice-O-Matic, Scotsman

ƒ

Cubers: up to 650 lbs/day
Hoshizaki

ƒ

Flakers: 1500–2500 lbs/day
IMI Cornelius, Manitowoc, Follett,
Ice-O-Matic, Scotsman

Replacement Cartridges

ƒ

EV9534-26
EC-210
Prefilter (1 ea)

ƒ

EV9612-22
i-2000

2

(2 ea)

System available without prefilter: EV9324-02 Insurice Twin

EV9325-23 Insurice Triple PF-i4000

2

System

Built-in prefilter removes sediment and coarse dirt particles

ƒ

Cubers: 1200–1600 lbs/day
IMI Cornelius, Manitowoc, Follett,
Ice-O-Matic, Scotsman

ƒ

Cubers: 650–1150 lbs/day
Hoshizaki, Vogt

ƒ

Flakers: 2500–3500 lbs/day
IMI Cornelius, Manitowoc, Follett,
Ice-O-Matic, Scotsman

Replacement Cartridges

ƒ

EV9534-26 EC-210
Prefilter (1 ea)

ƒ

EV9612-32
i-4000

2

(3 ea)

System available without prefilter: EV9325-03 Insurice Triple

Ice Makers

Flake & Cube Models

High and Low Flow Rate Machines:

Most problems with ice makers are

water related (70% by manufacturers’

estimates). Clean up the water and

clean up most maintenance problems!

Chief Offenders:

ƒ

Dirt: Wears pumps, blocks

solenoids, pits evaporators.

ƒ

Chlorine*: Gas corrodes stainless

parts, surfaces rust.

ƒ

Scale Buildup: Coats evaporator,

slows harvest, lowers production,

increases energy usage.

Solution:

Everpure Insurice Systems:

ƒ

Provide excellent flow rates for

even largest machines.

ƒ

Remove dirt particles down to

1/2 micron in size.

ƒ

Reduces chlorine, prevents rusting

of stainless parts.

ƒ

Reduces lime scale buildup that

will cause poor ice production and

freeze-up.

Sizing Ice Machines by

Brand & Series/Capacity:

ƒ

If you know the manufacturer

and the “size” of the ice maker,

EVP 1-2-3 will point you to

the correct filter system or

replacement cartridge.

These sizing recommendations

are merely general guidelines. For

exact sizing by Manufacturer and

model number, please contact

Everpure Technical Service:

[email protected]

or 800.942.1153.

Advertising
This manual is related to the following products: