Everpure QC7I Single-MH2 - Manual (Page 56)

Customer Service / Technical Support: 800.942.1153 / 630.307.3000 n Fax: 800.942.0081 / 920.803.3805 54
EVP123
EV9328-06 Everpure High Flow CSR Triple-MC 2 System
System
ƒ EV9328-06 CSR Triple-MC
2
Requirements & Specifications
ƒ Micro-Pure ® II media with anti-microbial protection
inhibits potential bacterial growth
ƒ Built-in prefilter removes sediment and prolongs
MC 2 cartridge life
ƒ Shut-off valve, inlet and outlet pressure gauges,
flushing valve
ƒ Supports 2 carbonators, 1200 Series ice maker, 3–4
carbonators, and high volume coffee equipment
ƒ SR-X scale reduction feeder for ice and coffee
Replacement Cartridges
ƒ EV9534-26 EC-210 Prefilter (1 ea)
ƒ EV9612-56 MC
2
(3 ea)
ƒ EV9799-32 SS-IMF (1 ea)
EV9437-10 Everpure High Flow CSR Quad-MC 2 System
System
ƒ EV9437-10 CSR Quad-MC
2
Requirements & Specifications
ƒ Micro-Pure II media with anti-microbial protection
inhibits potential bacterial growth
ƒ Built-in prefilter removes sediment and prolongs MC
2
cartridge life
ƒ Built-in shut-off valve, inlet and outlet gauges and flushing
valve
ƒ Flow rate up to 6.7 GPM
ƒ Supports 2 carbonators, 1200 Series ice maker, 3-4
carbonators, and high volume coffee equipment
Replacement Cartridges
ƒ EV9534-26 EC-210 Prefilter (1 ea)
ƒ EV9612-56 MC
2
(4 ea)
ƒ EV9799-32 SS-IMF (1 ea)
System available with low
pressure alarm (EV9328-05)
†
System available with low
pressure alarm (EV9437-11)
†
Combination Systems
Great tasting soda and coffee,
ice makers that stay clean and
producing, FCB machines with no
“off tastes”, steamers that stay on
line, all good reasons to use Everpure ®
High Flow Systems. Models support up
to 7 GPM flow rates and most feature
built-in prefilters.
Everpure High Flow Combination
Filter Systems are capable of
serving multiple pieces of foodservice
equipment from one central filtration
system. Ice makers, coffee equipment,
espresso, fountain beverages, drinking
water and steam equipment all
benefit from Everpure’s pure, clean
“ingredient quality” water.
From a small C-Store to a full size
restaurant, great water is as easy as
EVP 1-2-3!
A general rule of thumb is that each
MC 2 or XC 2 has a flow rate of
1.67 GPM. Each FC has a flow rate
of 2.5 GPM. Total the system flow rate
demand and determine how many
filters you need for your system.
# of Filters
Flow Rate GPM
MC 2 or XC 2 FC
1 1.67 2.5
2 3.34 5
3 5.01 7.5
4 6.68 10
Combination Systems Sizing Guide
These sizing recommendations
are merely general guidelines. For
exact sizing by Manufacturer and
model number, please contact
Everpure Technical Service:
[email protected]
or 800.942.1153.
MicroPure II – A precoat filter with AgION antimicrobial compound that inhibits the growth of
bacteria. As water passes through the filter, the carbon adsorbs chlorine, off-tastes and odors, and
AgION works to inhibit any bacterial growth.