Log placement (13 log set) – Empire Comfort Systems DVX36DP31 User Manual

Page 40

Advertising
background image

25613-0-0309

Page 40

6. Place Bottom Left Log (C) on far left pin of burner. The "lip"

of the log will hang off the side of the burner.

7. Place Bottom Left Center Log (D) on second and third pins

from left side of the burner.

8. Place Bottom Right Center Log (E) on fourth and fifth pins

from the left side of the burner.

LOG PLACEMENT (13 LOG SET)

Before you begin: If you are installing logs into the DVX36 or

DVX42 model then this fireplace is supplied with a set of 13

ceramic fiber logs. Do not handle these logs with your bare hands.

Always wear gloves to prevent skin irritation from ceramic fibers.

After handling logs, wash your hands gently with soap and water

to remove any traces of fiber.
The positioning of logs is critical to safe and clean operation of

this fireplace. Sooting and other problems may result if the logs

are not properly and firmly positioned in the fireplace. Please refer

to Figures 63 through 66 and corresponding WARNING, when

completing the following log placement steps.
1. Remove front. See Page 61.
2. Remove glass door from firebox.
3. Remove logs from bun.
4. Place Rear Bottom Log (A) on the rear part of the burner over

the pilot.

5. Place Rear Top Log (B) on log shelf on burner ensuring pins

go into holes on bottom of log.

Advertising
This manual is related to the following products: