Elation Professional Architectural Show System AR-32RM - Manual (Page 12)

6.1 USB Drive Program & AR-32 Configuration Program Installation
6.1.1 USB Drive Program Installation
If you first use the system, you must install the USB Driver and AR-32 Configuration Software program as the
simply following these steps;
1.Before installing USB Drive program, please ensure all tension and USB cable connections are connected
properly.
2.Download the main program folder, copy and save them in the pointed path of your computer which you
wish.
3.Connect your AR-32RM to your computer with USB cable via USB port.
4.Power the AR-32RM on.
5.And a promote screen will indicate you to install USB Driver program by following the installation process
till it has been completed.
NOTE: You must select "Driver" directory in the main folder to install.
6.1.2 AR-32 Configuration Program Installation
6.1.3 How to uninstall USB Drive program and AR-32 Configuration software
Open the main folder file, and select AR-32 program, then simple double-click on the "SETUP.EXE" file,
follow the installation process to install till it has been completed.
USB Drive program and AR-32 Configuration software can be uninstalled via "Add or Remove
Programs" utility found in the Control Panel.
6. AR-32 Configuration Software Operating Guide
12