Elation Professional Architectural Show System AR-32RM - Manual (Page 25)

Configuring Shows
Up to 16 scene files may be assigned to each of the 32 show locations (maximum of 248 scene files or 128 Mb).
Select the show to configure using the drop menu in the top right corner of the screen (Figure 2
0). Set the base
address of the AR-32 in the DMX Address field. This allows a DMX device to trigger the AR-32 remotely. Set
the fade time (between scenes) in the Fade Time field. This value determines how many seconds it takes to
change from scene to scene.
Figure 2 0
Assign scenes to the selected show using the [>], [Insert], and [<] buttons. Highlight a scene in the AR-32
Scenes File List and select [>] to add it to the show list on the right. Likewise, highlight a scene in the show list
and select [<] to remove it from the show. To insert a scene, highlight it in the AR-32 Scenes File List, then
highlight the scene it should precede in the show list, and select [Insert].
To save a configured show to the AR-32C controller, select [Download to Keypad].
6
25