Yaskawa J1000 Compact Vector Control Drive User Manual
Yaskawa ac drive-v1000, Quick start guide, Compact vector control drive
Advertising
MANUAL NO. TOEP C710606 47C
YASKAWA AC Drive-V1000
Compact Vector Control Drive
Quick Start Guide
Type: CIMR-VU
Models: 200 V Class, Three-Phase Input: 0.1 to 18.5 kW
200 V Class, Single-Phase Input: 0.1 to 3.7 kW
400 V Class, Three-Phase Input: 0.2 to 18.5 kW
To properly use the product, read this manual thoroughly and retain
for easy reference, inspection, and maintenance. Ensure the end user
receives this manual.
Contém manual suplementar em Português.
Mechanical Installation
Electrical Installation
Start-Up Programming &
Operation
Troubleshooting
Specifications
Parameter List
Standards Compliance
Receiving
1
2
3
4
5
A
B
C
Advertising
Table of contents
Document Outline
- Front Cover
- Table of Contents
- i Preface & General Safety
- 1 Receiving
- 2 Mechanical Installation
- 3 Electrical Installation
- 4 Start-Up Programming & Operation
- 4.1 Using the Digital LED Operator
- 4.2 The Drive and Programming Modes
- 4.3 Start-up Flowcharts
- 4.4 Powering Up the Drive
- 4.5 Application Selection
- Setting 1: Water Supply Pump Application
- Setting 2: Conveyor Application
- Setting 3: Exhaust Fan Application
- Setting 4: HVAC Fan Application
- Setting 5: Compressor Application
- Setting 6: Preset 6
- Notes on Controlling the Brake when Using Application Preset 6
- Setting 7: Preset 7
- Setting 8: Conveyor Application 2
- 4.6 Basic Drive Setup Adjustments
- 4.7 Auto-Tuning
- 4.8 No-Load Operation Test Run
- 4.9 Test Run with Load Connected
- 4.10 Test Run Checklist
- 5 Troubleshooting
- Appendix: A Specifications
- Appendix: B Parameter List
- Appendix: C Standards Compliance
- Revision History
- Back Cover