Yaskawa J7 Drive User Manual
J7 drive technical manual
Advertising
Table of contents
Document Outline
- J7 Drive Technical Manual
- TABLE OF CONTENTS
- QUICK REFERENCE FOR PARAMETERS
- CURRENT RATINGS & HORSEPOWER RANGE
- WARNINGS & CAUTIONS
- SIMPLIFIED STARTUP PROCEDURE
- 1 - RECEIVING AND INSTALLATION
- 2 - INITIAL START-UP
- 3 - OPERATION AT LOAD
- 4 - DIGITAL OPERATOR
- 5 - PROGRAMMABLE FEATURES
- 5.1 GENERAL
- 5.2 ACCEL/DECEL TIME
- 5.3 ACCEL/DECEL: S-CURVE CHARACTERISTICS
- 5.4 AUTO-RESTART
- 5.5 CARRIER FREQUENCY
- 5.6 CRITICAL FREQUENCY REJECTION
- 5.7 DC INJECTION BRAKING
- 5.8 FREQUENCY REFERENCE BIAS/GAIN (ANALOG)
- 5.9 FREQUENCY REFERENCE UPPER AND LOWER LIMITS
- 5.10 FREQUENCY REFERENCE RETENTION
- 5.11 FREQUENCY REFERENCE SELECTION
- 5.12 JOG REFERENCE
- 5.13 LOCAL/REMOTE REFERENCE AND SEQUENCE SELECTION
- 5.14 MODBUS CONTROL (OPTIONAL)
- 5.15 MOMENTARY POWER LOSS RIDE-THRU
- 5.16 MULTI-FUNCTION ANALOG MONITOR OUTPUT (Term. AM and AC)
- 5.17 MULTI-FUNCTION INPUT TERMINALS (Term. S1-S5)
- 5.18 MULTI-FUNCTION OUTPUT TERMINALS (Term. MA, MB, MC)
- 5.19 OVERTORQUE DETECTION
- 5.20 RESET CODES: 2-WIRE, 3-WIRE INITIALIZATION
- 5.21 SLIP COMPENSATION
- 5.22 STALL PREVENTION
- 5.23 STOPPING METHOD
- 5.24 THERMAL OVERLOAD PROTECTION Short Term Rating Standard Rating
- 5.25 TORQUE COMPENSATION
- 5.26 V/f PATTERN
- 5.27 COPY FUNCTION
- 6 - FAULT DIAGNOSIS AND CORRECTIVE ACTIONS
- Appendix 1. LISTING OF PARAMETERS
- Appendix 2. SPECIFICATIONS
- Appendix 3. CAPACITY RELATED PARAMETERS
- Appendix 4. PERIPHERAL DEVICES
- Appendix 5. J7 DIMENSIONS
- INDEX
- REAR COVER
- Return to Technical Manual Selector Page
- Return to Communication Manual Selector Page
- Return to Option Sheets Index Page