iHealth Wireless Blood Pressure Monitor - Manual (Page 6)

6
During measurement, press the “START/STOP” button to stop measurement.
Press the “START/STOP” button for 2 seconds to turn off the monitor
manually.
Auto Connect Option
Auto connect option allows the monitor to find the last used iOS device
and re-establish the connection automatically. Auto connect option can
be enabled in the App. (Device Setting->Auto Connect->On)
Taking Measurements with Multiple iOS Devices
Turn off the Bluetooth of the last used iOS device if the Auto Connect
option is enabled in your App, then follow the Set Up Instructions in
the Quick Start Guide.
Measuring without an iOS Device
Enable the Offline Measurement function on the App.(Device
Setting->Offline Measurement->On)Apply the cuff, follow the
“Measurement Procedures”, and then press the “START/STOP” button to
begin measurement. All offline measurements will be uploaded to the
App automatically upon the next successful Bluetooth connection.
For detailed operating instructions, please visit www.ihealthlabs.com.
Note: Physical activity including eating, drinking, and smoking as well
as excitement, stress, and many other factors influence blood pressure
results.
ATTENTION: You can stop the measurement process at any time by pressing and holding
the “START/STOP” button for 2 seconds.
SPECIFICATIONS
1. Product name: Wireless Blood Pressure Monitor
2. Model: BP5
3. Classification: Internally powered, Type BF applied part, IPX0, No
AP or APG, Continuous operation
4. Machine size: approx. 5.7”× 2.3”×1.2”(145mm × 58mm ×30mm)
5. Cuff circumference: 8.6”-16.5”(22cm-42cm),
16.5”-18.9”(42cm-48cm) (XL size sold separately)
6. Weight: approx. 5.1oz (145g) (including cuff); approx. 5.6oz (160g)
(including XL cuff)
7. Measuring method: Oscillometric method, automatic inflation and