Lanner LEC-3000A - Manual (Page 25)

23
Driver Installation
Appendix E
Network Application Platforms
Linux
Follow these instructions to install the Realtek® LAN
controller base driver for the Red Hat® and Linux operating
system
Insert the Drivers and User’s Manual CD to the USB- 1
Optical drive and mount the optional drive in the
Linux platform
Copy the archive driver in BZ2 file from the Drivers and
2
User’s Manual CD to the directory of your local hard
disk The Realtek® LAN driver for Linux OS is located in
the following directory:
\Driver\RTL8111_Driver\LINUX The name format of
driver file is “r8168-<Version> tar bz2”
Untar/unzip the archive file: 3
tar xvfj <driver-file-in> tar bz2
Compile the driver module by typing the following 4
command:
make install
The binary will be installed as: 5
/lib/modules/<kernel_version>/kernel/drivers/net/
The install locations listed above are the default
locations They might not be correct for certain Linux
distributions
Assign an IP address to the interface by entering the 6
following, where <x> is the interface number:
ifconfig eth<x> <IP_address>
Verify that the interface works Enter the following, 7
where <IP_address> is the IP address for another
machine on the same subnet as the interface that is
being tested:
ping <IP_address>
Note: For LAN drivers installing on other operating
systems, visit Realtek’s download page at
h t t p : / / w w w re a l t e k c o m t w / D o w n l o a d s /
downloadsView aspx?Langid=1&PNid=13&PFid=5
&Level=5&Conn=4&DownTypeID=3&GetDown=fa
lse
Chipset Platform Driver Installation
The VIA Hyperion Pro Driver features four drivers to help
increase the stability and performance of the system with
VIA chipsets as well as tools which are useful for advanced
configurations These drivers include IDE Falcon Storage
Device driver, AGP Driver, RAID Driver and Raid Tools, and
so on
Windows Operating systems
Restart the computer, and then log on with 1
Administrator privileges
Insert the Drivers and User’s Manual CD to the USB-
2
Optical drive
Browse the contents of the Drivers and User’s Manual
3
CD under the directory: \Driver\VIA_HyperionPro_
Driver
Execute the installer program, “SETUP exe” by double-
4
clicking the icon
Note: For drivers installing on linux based operating
systems such as Ubuntu and SuSE Linux , visit Via’s
download page at http://linux via com tw/support/
downloadFiles action
VGA Driver Installation
This section provides the instructions on how to install
VGA adapter drivers
Windows Operating systems
Restart the computer, and then log on with 1
Administrator privileges
Insert the Drivers and User’s Manual CD to the USB-
2
Optical drive
Browse the contents of the Drivers and User’s Manual
3
CD under the directory: \ Driver\VIA_VGA_Driver_for_
XP_2K
Execute the installer program, “SETUP exe” by double-
4
clicking the icon