Lanner LEC-7388S - Manual (Page 18)

18
Hardware Setup
Chapter 4
Embedded and Industrial Computing
Installing the Hard Disk
The system can accommodate one Serial-ATA 2.5” disk.
Follow these steps to install a hard disk into the LEC-
7388S):
Take out the hard disk tray from the system. 1.
Place hard disk on the hard disk tray and align the holes 1.
of the hard disk with the mounting holes on the tray.
Fix the hard disk on the hard disk tray by using 2
2.
mounting screws
Push the hard disk into the hard disk slot and secure it
3.
with a screw.
Note:
The system only accommodates 2.5” SSD. It
supports SATA 3.0 specification.
Installing 3G and Wireless Modules
Take off the cover to access the Mini-PCIe and SIM 1.
card.
Align the wireless module’s cutout with the Mini-PCIe
2.
slot notch.
Insert the wireless module into the connector
3.
diagonally.
Push the other end of the wireless module and secure
4.
it in place with the screws.
Install the Antenna to the module.
5.
Installing a 3G SIM Card
Take off the cover to access the Mini-PCIe and SIM 1.
card.
Unlock the SIM card tray by sliding it outward and
2.
open it.
Place the SIM card in the tray. Make sure the ICs is in
3.
contact with the socket. The angled corner of the SIM
ensures that the card fits only the correct way in the
tray.
Close and lock the tray. You should feel a click when
4.
the SIM card is locked securely in the socket.
Power Connector
Drive Connector
Lock Unlock