5 program profiles, Setting up and running the programs, Entering weight – LeMond g-force UT User Manual

Page 19: Entering age, Hill hr program

Advertising
background image

1

LED matrix will then display the profile with the correct number of intervals. Each column will repre-

sent 1 minute. The column that the user is currently in will flash for reference. The HR intervals will vary

between 60% and 80% of the users Max HR. The program will also have a constant 5 minute warm up

and 3 minute cool down. The cool down will be the standard cool down used on the manual, hill, etc.

programs.

During the Hill program, the LED matrix will display the above profile. The profile will not change and

each column duration will be determined by the total workout time. The workout time can vary be-

tween 20 minutes and 99 minutes. The column that the user is currently in will flash for reference. The

user’s HR will vary between 60% max HR and 80% max HR.

The goal of the program is to have the users HR at the level indicated by the LED matrix by the end of the

interval time.

Setting Up and Running the Programs

The easiest way to set up and run the programs in the display console, is to simply enter data as asked

for by the MESSAGE DISPLAY. The prompts in the MESSAGE DISPLAY are simple messages that guide you

through the program set up. The following is a detailed description of the same messages that are asked

of you in the MESSAGE DISPLAY.

Entering Weight:

Your current body weight is used to calculate your caloric expenditure. After selecting a PROGRAM,

the MESSAGE DISPLAY will prompt you to enter your weight. Use the + or – keys to change the default

weight of 180 that is shown in the PROFILE DISPLAY. When your current weight is displayed in the PRO-

FILE DISPLAY, press the ENTER key.

Entering Age:

Your current age is used to calculate your target heart rate. Use the + or – keys to change the default age

of 40 that is shown in the PROFILE DISPLAY. When your correct age is displayed in the PROFILE DISPLAY,

press the ENTER key.

5 PROGRAM PROFILES

100

90

80

70

60

50

40

30

20

10

%
Max
HR

Cool DN

Note: Maximum is 80% MAX HR, minimum is 60% MAX HR
Program Range 20 - 99 minutes

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 1 2 3

Hill HR Program

HR program with 2 high HR peaks and 3 minute cool down

Advertising