7 troubleshooting – LeMond g-force UT User Manual

Page 29

Advertising
background image

2

7 TROUBLESHOOTING

SOLUTION:

If using the contact heart rate sensor grips:

Make sure that the connection for the sensor grips is secure. Refer to the Assembly

Guide for specific connection instructions.

Grasp the heart rate sensor grips with both hands and apply firm and even pressure to

the grips.

Remember that contact heart rate grips are not always accurate due, in part, to biologi-

cal differences between users. Contact heart rate can be affected by body oils, metal

from jewelry or in clothing, as well as outside electrical interference.

PROBLEM:

Bike makes clicking noises.

SOLUTION:

Silly as it sounds, this is often simply a matter of shoelaces or pedal straps hitting the

side covers of the bike.

SOLUTION:

So, you say it’s not the shoelaces. Remove the pedals from the crank arms using the

pedal wrench that came with your bike. Apply multipurpose grease to the pedal

threads, then reattach and tighten the pedals keeping in mind that the left pedal is

reverse threaded.

PROBLEM:

Bike wobbles or rocks when in use.

SOLUTION:

Make sure that the bike is level in the position that it is located in. It should not rock

back and forth when in use. Make needed adjustments with the leveling feet that are

located on the rear stabilizer. Refer to the Assembly Guide for specific leveling instruc-

tions.

Advertising