EverFocus eDR400 - Manual (Page 31)

Administrator’s Guide and Operating Instructions
27
!"Installed – Check this item if the selected Camera is installed. If the
selected Camera is installed, all the items in the Behaviors For Each
Camera are settable. The default setting is installed.
!"Recording Quality For All Cameras – The range is 0-10, with 0 the
lowest (rough) quality, 10 the highest (fine) quality. The default
value is 5 . Use the Up/Down arrow buttons to adjust the value.
!"Compression Method For All Cameras – MPEG (MPEG-1) or
JPEG-CIF (JPEG), resolution – 352x240 for NTSC, 352x288 for
PAL.
!"Enable Digital Watermark – Check to enable digital watermark. The
system provides up to 64 positions to locate the digital watermark.
Click on the Vertical Position and Horizontal Position items to select
the desired location. For the vertical position, the number 0 ~ 7
is from up to down, for the horizontal position, the number 0 ~ 7 is
from left to right.
!"Time Stamp – Click on the button for the Time Stamp setting menu.
The system provides user options to select the font size, position and
color of the time stamp on the playback image.
!"Enable Motion Detection – Check to enable motion detection for the
selected Camera at the selected Time Type.
!"Motion Action – The corresponding Motion Action if motion
detection enabled.
!"Video Loss Action – The corresponding Video Loss Action (always
enabled).
!"Normal Record (FPS) – The normal recording rate for the selected
Camera at the selected Time Type. Use the Up/Down arrow buttons
to adjust the value (0-30). The default value is 0.1 Frame Per Second
(or 6 Frame Per Minute). (Note)
!"Alarm Record (FPS) – The alarm-recording rate for the selected
Camera at the selected Time Type. Use the Up/Down arrow buttons
to adjust the value (0-30). The default value is 5 Frame Per Second
(or 300 Frame Per Minute).