Remote control – EverFocus eDR400 User Manual
Page 53
Administrator’s Guide and Operating Instructions
49
9. Remote Control
Through Local Network, Intranet, Internet or dial-in functions, users are
able to view the live video, image playback and upload/download the
configuration file of EDR400 from any PC in anywhere. The remote
computer does not need to have the EDR400 software or any special
hardware and software installed.
Connecting the Remote PC and Server
Connecting the Remote PC and Server
Connecting the Remote PC and Server
Connecting the Remote PC and Server
Before you start, please verify the connection between EDR400 and the
modem or network. The procedure for configuring a remote PC depends
on the desired type of connection. The user can either dial directly into the
server through modem, or connect over a network. You must obtain IP
addresses for the remote PC and EDR400, please refer to Chapter 6.15
System Configurations for the details.
Remote View
Remote View
Remote View
Remote View
After the Remote PC and EDR400 are connected, start your Web browser
and enter the system IP address in the Location/Address field.
(Note.1)
Example:
The main page will be shown on the screen, enter the appropriate Login
name and password, then click on the Submit button. (Note. 2)
The main control page will be shown as below.
http://
61.218.36.254