EverFocus eDR400 - Manual (Page 50)

Administrator’s Guide and Operating Instructions
46
8.1 Select HDD & Range Dialog Box
When the user click on the Select HDD & Range icon on the
Playback Panel, the Select HDD & Range dialog box will be shown
on the screen. The system provides user to search the image either by
HDD location or by time. Use the Down arrow of the upper left
column in the diagram box to select the desired searching way.
To search by location, the diagram will be shown as below.
The following is a brief description for each item shown above.
!"HDD No – The recorded Hard Disk to playback.
!"Start/End Block No – 1 GB/Block or 32 Sections/Block for the
system. The maximum End Block No. represents the Block
number for the last recorded video or the maximum block number
for the Hard Disk. Use the Down arrow button to select the
Start/End Block No.
!"Options to Play – To playback all recorded video images, or to
playback only motion or alarm detected video images of the assigned
location.
Search by location
01
01
01
01
01
01
01
V
01-01-01
2001/8/13 Mon, 18:46:50
N Y N N N Y Y N N N Y Y N N N N
N Y N N N Y Y N N N Y Y N N N N
N Y N N N Y Y N N N Y Y N N N N
N Y N N N Y Y N