Olympus PEN E-PL8 - Manual (Page 105)

105 EN
Menu functions (Custom menus)
4
Adding information displays
MENU
c U [G/Info Settings]
LV-Info (Shooting information displays)
Use [LV-Info] to add the following shooting information displays. The added displays are
displayed by repeatedly pressing the
INFO button during shooting. You can also choose to
not show displays that appear at the default setting.
Highlight & Shadow display
L N
01:02:03 01:02:03
38 38
250 250 F5.6 P 0.0 0.0
ISO
200
HD
Highlight & Shadow display
Areas above the upper limit of brightness for the image are shown in red, those below the
lower limit in blue.
g [Histogram Settings] (P. 90 )
q Info (Playback information displays)
Use [
q Info] to add the following playback information displays. The added displays are
displayed by repeatedly pressing the
INFO button during playback. You can also choose to
not show displays that appear at the default setting.
Highlight & Shadow display Light box display Histogram display
16 15
15
Shadow Highlight 15
×10 ×10
Light box display
[
q Close Up Mode] in the custom menu must be set to [mode2] to show this display.
Compare two images side-by-side. You can move the selected image on the right to the
reference image on the left by pressing z.
• The base image is displayed on the right. Using the control dial (P) or
HI to select an
image and pressing z moves that image to the left screen. The image to be compared
to the image on the left can be selected on the right. To choose a different base image,
highlight the right frame and press z.
• To zoom in, choose the image to be zoomed by using the U button, press the
INFO
button, and then use
FG or the control dial (P) to change the zoom ratio.
• Use
FGHI to view other areas of the picture. The image to be zoomed changes each
time U is pressed.
2 x 2 x 53 54
2 x
U U U