Epson USN 52L - Manual (Page 93)

5-48 Issue 05, 02/00 Krautkramer USN 52R/USN 52L
VALUE Displaying the measured value
The measured value at the selected location is dis-
played:
• EMTPY: No reading stored
• xx.x mm: The stored reading
Clearing the measured value:
– Highlight the right function group in the left function
table with I.
– If necessary, press M for about 3 seconds in order
to clear the displayed reading.
FILE MODE Enabling the Data Logger
In FILE MODE you can enable or disable the Data Log-
ger:
• OFF: Data Logger is disabled.
• THICKNESS: Data Logger is enabled.
H Note:
You can only enable the Data Logger when DATA LOG-
GER is selected in COPY MODE (right function table).
Operation:
– Highlight the right function group in the left function
table with I.
– With M alternately enable and disable the Data
Logger.
Operation Configuring the USN 52R/USN 52L
5-48 Issue 05, 02/00 Krautkramer USN 52R/USN 52L
VALUE Displaying the measured value
The measured value at the selected location is dis-
played:
• EMTPY: No reading stored
• xx.x mm: The stored reading
Clearing the measured value:
– Highlight the right function group in the left function
table with I.
– If necessary, press M for about 3 seconds in order
to clear the displayed reading.
FILE MODE Enabling the Data Logger
In FILE MODE you can enable or disable the Data Log-
ger:
• OFF: Data Logger is disabled.
• THICKNESS: Data Logger is enabled.
H Note:
You can only enable the Data Logger when DATA LOG-
GER is selected in COPY MODE (right function table).
Operation:
– Highlight the right function group in the left function
table with I.
– With M alternately enable and disable the Data
Logger.
Operation
Configuring the USN 52R/USN 52L