Parkside PWSA 18 A1 - Manual (Page 29)

29
GB MT
General description
See the front fold-out page for
illustrations.
Extent of the delivery
Carefully unpack the appliance and check
that it is complete. Dispose of the packag-
ing material correctly.
- Device
- Battery-charger
- Battery
- Additional handle
- Protective hood
- Chuck key
- Cutting disc
- Translation of the original instructions
for use
Description of function
The angle grinder is made for cutting,
scrubbing or brushing metal. There is a
special disc for each of the separate ap-
plications. Please refer to the information
from the disc manufacturer.
Please refer to the descriptions below for
information about the operating devices.
The battery included in the scope of deliv-
ery can also be used for the cordless recip-
rocating saw PSSA 18 A1 and the cordless
drill driver PDSSA 18 A1.
Overview
1 Chuck key with storage facility
(not visible)
2 Additional handle
3 Spindle stop button
4 Threads for additional handgrip
5 On/off switch
6 Handgrip
7 Activation button battery Indicator
8 Battery Indicator
9 Battery
10 Battery release button
(not visible)
11 Power plug of charger
12 Green LED
13 Red LED
14 Charger
15 Tightening lever for protective
hood
16 Cutting disc
17 Protective hood
18 Mounting flange
19 Clamping nut
20 Mounting spindle
21 Adjustment nut
Technical data
Angle Grinder PWSA 18 A1:
Rated input voltage
................................................. 18 V
Measurement idling speed (n) ...8000 min -1
Dimensions of the cutting/roughing discs
................................. Ø 115 x 22,2 mm
Thickness of the cutting/roughing discs
............................................ max. 6 mm
Grinding spindle thread ................... M14
Thread length of the grinding spindle
..........................................max. 14 mm
Protection category........................... IPX0
Sound pressure level
(L
pA
) ................... 81,6 dB(A); K
pA
= 3 dB
Sound power level (L
wA
)
measured ...........92,6 dB(A); K
wA
= 3 dB
guaranteed ........................... 96 dB(A)
Vibration values (a
h
)
Main handgrip ... 3,043 m/s 2 K= 1,5 m/s 2
Additional handle 5,024 m/s 2 K= 1,5 m/s 2