Parkside PWSA 18 A1 - Manual (Page 76)

76
Volker Lappas
Documentation Representative
Translation of the original EC
declaration of conformity
We hereby confirm that the
Cordless Angle Grinder
Design Series PWSA 18 A1
Serial Number
201502000001 - 201503040000
conforms with the following applicable relevant version of the EU guidelines :
2006/42/EC • 2004/108/EC • 2006/95/EC • 2011/65/EU*
In order to guarantee consistency, the following harmonised standards as well as national
standards and stipulations have been applied:
EN 60745-1/A11:2010 • EN 60745-2-3/A2:2013
EN 60335-1:2012 • EN 62233:2008 • EN 60335-2-29/A2:2010
EN 55014-1/A2:2011 • EN 55014-2/A2:2008
EN 61000-3-2/A2:2009 • EN 61000-3-3:2013
This declaration of conformity (15)** is issued under the sole responsibility of the
manufacturer:
Grizzly Tools GmbH & Co. KG
Stockstädter Straße 20
63762 Großostheim
Germany
25.03.2015
GB
*The object of the declaration described above satisfies the provisions of Directive 2011/65/EU
of the European Parliament and the Council of 8 June 2011 on limiting the use of certain harmful
substances in electrical and electronic appliances.
**The last two digits of the year in which the CE marking was affixed.
MT