Curtis TID981 - Manual (Page 4)

2. When you finish talking, replace the handset in the cradle. The call is
disconnected
Redialing
You can redial the last number called with just one touch of the REDIAL button. This
lets you easily redial the same number again if the line was busy.
1. Pick up the handset or press [SPEAKER], you hear a dial Tone
2. Press [REDIAL], the last sequence of digits dialed will be automatically redialed.
The digits appear on the display.
Putting a call on hold
The HOLD button allows you to temporarily suspend a phone conversation without
disconnecting the call.
1. Press HOLD, a simple rhythm tone will be heard by both sides you can place the
handset back on the cradle.
2. To resume the conversation, pick up the handset. If you did not place the handset
back on the cradle, press SP-PHONE BUTTON.
When a call is put on hold, this unit will mute the microphone automatically, so the
other party will not hear from your side.
Call Waiting
1. When you are on conversation.
2. LCD Displays the waiting call’s CID message.
3. Press ‘flash’ button to switch to the waiting call without disconnecting the current
call.
4. Press ‘flash’ button again to return to the first caller.
Viewing the Caller ID list
This phone automatically stores the data of the last 55 calls received. It keeps track of
all calls received, even if they were not answered. You can also view the data during
conversation.
To display the older date- Press the [UP] button.
To display the newer date – Press the [DOWN] button. If you press the button on
repeatedly, and view all data, “END OF LIST” will appear on the display.
“OUT OF AREA” or “PRIVATE” data is also counted as one call.
Erasing data from the Caller ID list
The phone maintains the data of the last 55 calls in memory. If there is a new call after