Curtis TID981 - Manual (Page 5)

those 55 calls, the oldest number will be automatically erased and the new call will be
stored.
To erase one stored number at a time-
1. Press [UP] or [DOWN] button to display the number you want to erase.
2. Press [DEL] twice to erase the data. To erase the entire list at once. Press and hold
[DEL] for 4 seconds, the entire list is deleted.
Calling back a number from the Call ID list
You can easily call back a number from the Call ID list by pressing the SPEED DIAL
buttons.
1. Press [UP] or [DOWN] button to select the number you wish to dial.
2. Press [DIAL] button, the number will automatically redialed.
Storing numbers into the one-touch dialing button from the Caller ID list
You can store the CALL ID data into the one-touch dialing memory. You can also edit
the data before store them.
1. Press UP or DOWN to the data you want to store.
2. Press [MODE] button, the cursor will blink on the left top of the display
3. If you want to edit the name, key in the new name by alphabet keys. If you want
to edit the number, key in the new number.
4. Press the memory (M1-M3) or AUTO button first, then enter the desire location
from 1-0 and “*”, “#” key you want this name and number to be stored in.
5. Pick up the handset and hang up to end this procedure.
Using the visual message waiting service
If you subscribe to your telephone company’s message service which includes this
feature the display will show that you have message waiting to be retrieved.
If you have message: icon appears on the display. This display will be cleared when
you retrieve your messages.
You cannot use this feature, if you have not subscribed to your telephone company’s
message service for details on service availability, please ask your telephone
company.
Filtering unwanted calls
The numbers stored in the one-touch dialing memory are regarded as “preferred calls”.
When the filter feature enabled, the numbers which are not stored in the memory are
regarded as “unwanted calls”. There are three filter levels:
Press [FLASH] Button for 3 seconds and [FILTER] icon appears on LCD