Electrolux EWX 14540 W - Manual (Page 12)

Programme Option buttons
Depending on the programme, different
options can be combined. These must
be selected after choosing the desired
programme and before pressing the
«Start/Pause» button.
In any case if you select an option not
compatible with the already selected
programme or option, the message Err
will be displayed for a few seconds,
and the integrated red «Start/Pause»
light start flashing.
Select the temperature
Press this button repeatedly to
increase or decrease the temperature,
if you want your laundry to be washed
at a temperature different from the one
proposed by the washer-dryer.
Maximum temperatures are 95°C for
Cottons, 60°C for Synthetics and Easy
Iron, 40°C for Delicates, Wool, fabrics
to be handwashed programmes, and
30°C for Silk.
Select the spin speed, Night Cycle,
or Rinse Hold option
1400
900
700
Spin
95º
60º
50º
40º
30º
Temp.
Press the «Spin» button repeatedly to
change the spin speed, if you want
your laundry to be spun at a speed
different from the one proposed by the
washer-dryer.
Maximum speeds are:
● for all Cottons programmes: 1400
rpm;
● for Synthetics, Easy Iron, Wool and
Handwash: 900 rpm;
● for delicate fabrics and Silk: 700 rpm.
Night Cycle : by selecting this
option, the machine will not drain the
water of the last rinse, so as not to
crease the laundry.
As all spinning phases are suppressed,
this washing cycle is very quiet and it
can be selected at night or in times
with a more economical power rate.
On some programmes, the rinses will
be performed with more water.
When the programme has finished, the
«Start/Pause» light goes off, the display
shows a flashing zero «
0.00 », the
«Door locked» pilot light is still
alight and the door is locked to indi-
cate that the water must be emptied
out.
To empty out the water:
● turn the programme selector dial to
«O»
● select the Drain or Spin
programme
● reduce the spin speed if needed, by
pressing the relevant button
● press the «Start/Pause» button
● at the end of the programme, the
display shows a «
0.00 » flashing.
The pilot light «Door locked» goes
out and the door can be opened.
Rinse Hold : by selecting this
option the water of the last rinse is not
emptied out to prevent the fabrics from
12 electrolux use
En tout cas si vous sélectionnez une option incompatible avec un pr
132972140 EN.qxd 26/10/2007 11.40 Pagina 12