Electrolux EWX 14540 W - Manual (Page 15)

use electrolux 15
minute.
Incorrect option selection
If an option which is not compatible with
the set wash programme is selected,
the message Err is displayed for few
seconds and the integrated red
«Start/Pause» light starts flashing.
Alarm codes
If there is a fault, some alarm codes can
be displayed, for example
E20 (see
paragraph “Something not working”).
End of programme
When the programme has finished 3
flashing zeros are displayed, the
(Door locked) and the «Start/Pause»
lights go out and the door can be
opened.
0.00
E20
Select the Start/Pause
To start the selected programme, press
the «Start/Pause» button; the green
pilot light stops flashing.
The «door locked» pilot light
illuminates to indicate that the
appliance starts operating and the door
is locked.
The “door” pilot light indicates if
the door can be opened:
• light on: the door cannot be opened.
The appliance is running.
• light off: the door can be opened.
The washing programme is finished.
To interrupt a programme which is
running, press the «Start/Pause»
button: the green pilot light starts to
flash.
To restart the programme from the
point at which it was interrupted,
press the «Start/Pause» button again.
If you have chosen a delayed start, the
machine will begin the countdown.
If an incorrect option is selected, an
integrated red pilot light of the
«Start/Pause» button flashes 3 times
and the message Err is displayed for a
few seconds.
Start/Pause
132972140 EN.qxd 26/10/2007 11.40 Pagina 15