EverFocus EDR810H - Manual (Page 51)

In HDD TEMP., we define:
(1) BUZZER: HDD TEMPERATURE buzzer.
ENABLE: To enable a buzzer when HDD’s temperature is over 70
° C.
DISABLE: To disable HDD TEMP. buzzer.
(2) ALARM OUTPUT:
The setting of alarms which are NONE and 1, where 1 means the alarm is enabled.
(3) ALARM DURATION: PERMANENT
(4) NETWORK ALARM:
YES: To enable network alarm.
NO: To disable network alarm.
(5) SEND EMAIL:
YES: Send an email when HDD’s temperature is overheated.
NO: Do not send an email when HDD’s temperature is overheated.
The email address can be set in the NETWORK SETUP MENU.
(6) STOP RECORD:
YES: Stop recording when HDD’s temperature is overheated.
NO: Won’t stop recording even when HDD’s temperature is overheated.
3.11.2 HDD TEMP.
51