Curtis VR215 User Manual
Page 7
7
2. Basic operation
2.1 Install battery
Slide the Battery Lid Switch(
) to “unlock” position.
Press / slide down the Battery Cover and insert two new AA alkaline batteries. Align with
correct polarity of battery terminals. Close the Battery Cover and lock the Battery Lid Switch.
2.2 Use SD/MMC card
Insert the SD Memory card into the SD/MCC Card Slot. Push it down until the card stays
latched.Do not force – check card’s position according to the position mark
on the camera.
Push and release inserted card if you wish to remove or replace the card.
Turn your camcorder OFF before inserting / removing the SD Card.
- Note that the SD Card has a tiny LOCK switch on the side. Set the switch
to un-LOCK position to be able to store recorded videos, still pictures on inserted SD
Memory Card.
2.3 Power on/off
In power-off state, press and hold the power key (
) to power on the camera.
In power-on state, press the power key (
) to power off the camera.