Back panel connections – EverFocus esrd EDSR-900 User Manual
Page 8
Back Panel Connections
2. Back Panel Connections
1
ON/OFF:
Main on/off switch.
2
AC100~240V
power socket
.
3
VIDEO IN:
BNC-sockets for composite signal video inputs, automatic 75 Ohm
termination (EDSR-900: 1 ~ 9, EDSR-1600: 1 ~ 16).
4
VIDEO OUT: Loop through video outputs for each input channel.
(EDSR-900: 1 ~ 9, EDSR-1600: 1 ~ 16)
Matrix Outputs: These connectors are used for additional 4 programmable Call monitors.
With these outputs, there are totally 4 Matrix out monitors.
These monitors can only display full screen as regular call monitor.
5
6
CALL MONITOR: BNC-socket Call (Spot) Monitor, composite signal. (Full screen display only)
7
8
MAIN MONITOR: BNC-socket main monitor, composite signal. Main monitor provides
Full screen, Multi-screen, Setup.
S-VIDEO:
Mini-DIN socket main monitor, S-Video signal. Main monitor provides
Full screen, Multi-screen, Setup.
3
1
2
5
4
3
6
7
8
9
10
11
12
13
14
AUDIO IN :
2 x Cinch socket audio input 500 mV max., 10K Ohm impedance.
AUDIO OUT: 2 x Cinch socket audio output 500 mV max. at 10K Ohm
9
1
2
5
4
3
6
7
8
9
10
11
12
13
14
EDSR-900
EDSR-1600