Parts ordering, Parts kits, Kits for side‐mounted handwheels – Emerson Process Management FISHER 657 User Manual

Page 19: Kits for top‐mounted handwheels, Instruction manual, Warning

Advertising
background image

Instruction Manual

D100306X012

657 Actuator (30-70 and 87)

December 2010

19

2. Readjust the travel stop to obtain the appropriate restriction by following the adjustment procedures presented in

the introductory portion of the Casing‐Mounted Adjustable Travel Stops section. Return the unit to operation.

Parts Ordering

Each actuator has a serial number stamped on the nameplate. Always mention this number when corresponding with
your Emerson Process Management sales office regarding technical information or replacement parts. Also, reference
the complete 11‐character part number of each needed part as found in the following Parts List.

WARNING

Use only genuine Fisher replacement parts. Components that are not supplied by Emerson Process Management should not,
under any circumstances, be used in any Fisher valve, because they may void your warranty, might adversely affect the
performance of the valve, and could cause personal injury and property damage.

Note

Neither Emerson, Emerson Process Management, nor any of their affiliated entities assumes responsibility for the selection, use, or
maintenance of any product. Responsibility for the selection, use, and maintenance of any product remains with the purchaser and
end‐user.

Parts Kits

Kits for Side‐Mounted
Handwheels

Key

Description

Part Number

Retrofit kit includes parts to add a side‐mounted handwheel.

Size 34 push down to close

30A8778X0A2

Size 34 push down to open

30A8778X0B2

Size 40 push down to close

30A8778X0C2

Size 40 push down to open

30A8778X0D2

Size 45 & 46 push down to close

40A8779X0A2

Size 40 & 60 push down to open

40A8779X0B2

Size 50 & 60 push down to close

40A8779X0C2

Size 50 & 60 push down to open

40A8779X0D2

Kits for Top‐Mounted
Handwheels

Key

Description

Part Number

Retrofit kit includes parts to add a top‐mounted handwheel. Kit 1
includes the handwheel assembly only. Kit 2 includes kit 1 and a new
diaphragm case that is required to mount the handwheel assembly.

KIT 1
 Size 30

28A1205X012

 Sizes 34 & 40

28A1205X022

 Sizes 45, 50, & 60

28A1205X032

 Sizes 70 & 87

CV8010X0032

KIT 2
 Size 30

28A1205X042

 Sizes 34 & 40

28A1205X052

 Sizes 45 & 50

28A1205X062

 Sizes 46 & 60

28A1205X072

 Sizes 70 & 87

CV8010X0042

Advertising