Scale removal – Aquapur ADR 1300 B2 Hand Steam Cleaner User Manual

Page 13

Advertising
background image

11

ADR 1300 B2

GB

WARNING - PROPERTY DAMAGE!

Do not use abrasive, aggressive or chemical cleaning agents! They could

irreparably damage the upper surfaces!

Remove the plug from the mains power socket.

1)

Allow the appliance to cool down.

2)

Empty the water tank

3)

3.

Clean the appliance, the water tank

4)

3 and the accessories with a moist

cloth. For stubborn soiling use a mild detergent on the cloth.

Scale removal

Place descaler suitable for household appliances with water into the water

1)

tank 3. Pay heed to the instructions given by the manufacturer of the des-
caler. Never fi ll the water tank 3 with more water than to the MAX marking.

Place the switch "

2) Anti-calc

Function"

4 at the position "I".

Replace the water tank

3)

3 back onto the appliance.

Remove the tip of the steam nozzle

4)

q, in that you use a coin or similar to

unscrew the tip.

Insert the plug into a mains power socket.

5)

Hold the appliance over a sink and press and hold the steam lever

6)

1 down.

After a short time (about 1.5 minutes) hot water drips from the steam nozzle q
and fl ushes the dissolved limestone and soiling out of the appliance.

When the water from the water tank

7)

3 is depleted and there is no more

water in the appliance, release the steam lever 1. Check to ensure that the
water with the descaler is completely used up. For this, tilt the appliance
forwards.

Remove the plug from the mains power socket.

8)

Remove the water tank

9)

3 and place the switch "Anti-calc Function" 4 at the

position "O"

Wait until the appliance has cooled down and then screw the tip of the

10)

steam nozzle q back onto the appliance.

IB_69184_ADR1300B2_LB4.indb Abs3:11

IB_69184_ADR1300B2_LB4.indb Abs3:11

28.10.2011 9:09:34 Uhr

28.10.2011 9:09:34 Uhr

Advertising
This manual is related to the following products: