Assembling the squeegee, Using the appliance, Filling/refi lling with water – Aquapur ADR 1300 B2 Hand Steam Cleaner User Manual

Page 9

Advertising
background image

7

ADR 1300 B2

GB

Assembling the squeegee

Open the large screw on the retainer of the squeegee

1)

6, such that you can

push in the metal rail with the rubber lip.

Thereby ensure that the broad side of the metal rail is at the top.

2)

Retighten the large screw.

3)

Using the appliance

WARNING! RISK OF INJURY!

To ensure faultfree operation and a long service life for the
appliance, pay heed to the following instructions:

First press the steam lever

1 when the green control lamp 8 glows. If you

press too early it may cause an accumulation of hot water in the appliance,
which will drip or spray from the nozzle. There is a risk of being scalded.
Before switching the appliance off , always allow all of the steam to drain

out by pressing the steam lever 1 until no more steam exits from the nozzle.

Filling/refi lling with water

RISK OF ELECTRIC SHOCK

Always disconnect the plug from the mains power socket before you add

water to the water tank 3!

Turn the water tank

1)

3 such that the marking on the water tank points to the

open lock

on the appliance. The water tank can then be detached from

the appliance.

Open the lid of the water tank

2)

3.

WARNING - PROPERTY DAMAGE!

Do not put any additives or cleaning agents in the water tank

3!

Fill the water tank

3)

3 with water. Ensure that you never fi ll the tank with

more water than up to the MAX marking, and never less than up to the
MIN marking.

Should the mains water at your locality be rated as hard, it is recommended that
you mix the mains water with distilled water. Otherwise, the appliance could
calcify prematurely and clog the steam nozzle q.

IB_69184_ADR1300B2_LB4.indb Abs3:7

IB_69184_ADR1300B2_LB4.indb Abs3:7

28.10.2011 9:09:34 Uhr

28.10.2011 9:09:34 Uhr

Advertising
This manual is related to the following products: