Auriol Z29962C - Manual (Page 78)

78 GB/MT
Q
Setting up the external sensor
Inserting the batteries:
j Remove the battery compartment cover from
the back of the external sensor.
j Insert two 1.5 V batteries (AA) (included) in
the battery compartment
27 .
note: make sure that the polarity is correct. This
is indicated inside the battery compartment
27
(see Fig. C).
– The external sensor is now ready for operation
and the indicator LED 25 will flash.
j Close the battery compartment cover.
Q
Setting up the weather station
Inserting the batteries:
j Open the battery compartment cover on the
back of the weather station.
j Place two 1.5 V batteries (AA) (included) in
the battery compartment
21 .
note: take care that the polarity is correct. This
is indicated inside the battery compartment
21
(see Fig. B).
j Close the battery compartment cover.
As soon as the batteries have been inserted, the
LCD indicates the indoor temperature
5 and the
humidity 3 . The weather station starts to receive
the signal from the external sensor. When it has
successfully received the external sensor signal, the
outdoor temperature
7 appears on the LCD after
around 1 minute.
note: do not alter the position of the weather station
when it is picking up the signal, as this can interfere
with reception.