Auriol Z29962C - Manual (Page 82)

82 GB/MT
Q
Setting the alarm
j Press and hold the ALARM button 13 for approx.
3 seconds.
note: if you have already set an alarm, the
set alarm time is displayed on the LCD together
with
AL. Otherwise 0:00 and AL are displayed.
j Press the ALARM button 13 briefly. The hours
start to flash.
j Press the ADJUST button 12 to set the required
number.
j Press the ALARM button 13 to confirm your
entry. The minutes start to flash.
j Press the ADJUST button 12 to set the required
number.
j Press the ALARM button, 13 to confirm your
entry.
j The LCD returns to the standard display (Time 9 ).
Q
Switching the alarm on / off
j Press and hold the ALARM button 13 for approx.
3 seconds. The set alarm time appears on the LCD.
j Press the ADJUST button 12 to switch the alarm
on or off.
note: when the alarm is switched on, is
displayed above
AL.
note: if no button is pressed within a space of
approx. 30 seconds, the LCD automatically
returns to the standard display.
j The alarm rings for approx. 2 minutes as soon as
the set alarm time is reached. The alarm signal
is switched off automatically after 2 minutes.
Press one of the buttons, MEMORY 11 ,
ADJUST 12 , ALARM 13 or CLOCK 14 , to
switch the alarm signal off within this time.
note: the alarm rings every day at the set time.