Auriol Z29962C - Manual (Page 79)

79 GB/MT
The weather station starts to pick up the radio signal
after it has successfully received the external sensor
signal. This process can take up to 7 minutes and is
indicated on the LCD by the flashing icon
15 .
Once the DCF radio signal has been picked up
successfully, the icon
15 is displayed constantly
on the LCD.
If synchronisation with the atomic clock is not possible
during setup, change the position of the weather
station (e.g. to next to a window).
j If the weather station does not work properly, you
can restart it by pressing the ADJUST button
12 .
Reception may be seriously restricted by certain
obstacles (e.g. concrete walls) or sources of inter-
ference (e.g. other electrical devices).
If interference with reception of the radio signal con-
tinues, you can also set the time and date manually
(see “Setting the time / date manually”).
Q
Mounting the product on a wall
note: You will require an electric drill and a cross-
head screwdriver for this step.
m CAUtIOn! DAnGEr tO LIFE, rISK OF
InJUrY AnD MAtErIAL DAMAGE! Read
the operating and safety instructions for your drill
carefully.
WArnInG! DAnGEr tO LIFE! Take care
that you do not hit electricity, gas or water lines when
you drill into the wall. If necessary, check with a pipe
and cable detector before drilling.