EverFocus EDR1600 - Manual (Page 20)

Administrator’s Guide and Operating Instructions
16
6. Setup (Administrator)
To login as an Administrator, please click on the Login icon, and enter the
appropriate Administrator’s Login name and Password (the factory default
value for both of them is admin).
To setup the behaviors of the system, please click on the Config icon.
The configuration menu will pop up as below.
Click on the menu item for the respective configuration. For the details
of each item, please refer to the following paragraphs. Click on the Exit
menu item to exit the setup. If the configurations related to Time Type
are changed, you may be asked to restart the system for those new settings
to take effect.
Note: If the system is in Sequence Mode display (please refer to Chapter 4), the
Display Seqs menu item will be grayed and not accessible.