EverFocus EDR1600 - Manual (Page 62)

Administrator’s Guide and Operating Instructions
58
/ – The next/previous single image corresponds to the selected
playback cameras will be played and displayed on its
corresponding video window.
– To pause the playback image.
Slider Bar – Showing the current playing position for image
playback. Click on it and drag the mouse to play the
video from anywhere in the selected range.
Note. 1 The best viewer’s environment is Internet Explorer 5.0 or above, 1024 x 768
If the PC is protected by the Firewall, please make sure Port 1600 is enabled
before accessed.
Note. 2 The Login Name and Password are the same as used in the system,
the Administrator can operate all the functions on remote end, the Supervisor
can view the live video and playback image, and the Operator can only view
the live video.
Note. 3
You must have the upgrading software in your remote PC in order to remote
upgrade the system. To obtain the software, you may contact your local
distributor or to download from FTP server directly. The IP address is
ftp://www.everfocus.com.tw , the login name and password both
are “edr1600”. Select the software version you would like to download, the
file name of the upgrade software will be “edr1600-X.X-tar.gz”, X.X stands
for the software version number.
Note 4 The remote end will not be able to view all the camera windows if there’s any
camera set as 0 FPS for the normal recording rate; unless all the cameras are
set as 0 FPS.
11. Remote View from i-mode
The system supports remote surveillance function from mobile phone via
i-mode system. The users (with all login levels) can view the live images by
using the i-mode mobile phones while the system is connected to the internet.
Operations: