Casio XJ-H2600 User Guide - Manual (Page 45)

45
Auto Power Off R C V H D U N Single Auto Power Off lets you specify the amount of time of projector
operation and input signal inactivity to be allowed before Auto Power
Off is triggered to turn off projector power automatically. Auto Power
Off can be disabled, if you want.
5 min, 10 min *, 15 min, 20 min, 30 min:
Time until Auto Power off is triggered.
Off:
Disables Auto Power Off.
Note
(for USB port model users)
Auto Power Off is disabled whenever the projector is doing
any one of the following.
– Projecting the Viewer initial screen
– Projecting the Wireless standby screen
– Using Wireless for a wireless LAN connection between
the projector and a computer or other terminal
Password
protection R C V H D U N Single See “Password Protection” on page 32.
Direct Power
On R C V H D U N Single Use this sub-menu to turn Direct Power On on or off. See “Direct
Power On” on page 29.
On:
Select this option to turn on Direct Power On.
Off *:
Select this option to turn off Direct Power On.
Language R C V H D U N Single Use this sub-menu to specify the language to use for messages,
setup menus, etc.
English / French / German / Italian / Spanish / Swedish /
Portuguese / Dutch / Norwegian / Polish / Finnish / Czech / Turkish /
Russian / Chinese (Simplified) / Chinese (Traditional) / Korean /
Japanese
Note
(for USB port model users)
If you have Portuguese, Dutch, Norwegian, Polish, Finnish,
Czech, Turkish, or Russian selected as the projector’s
language, selecting an external device connected to the
projector’s USB-A port as the input source will cause some
menus and messages to be displayed in English.
Restore Menu
Defaults R C V H D U N Single This sub-menu returns all of the sub-menu items on the Option
Settings 1 main menu to their initial default settings.
z The language setting and the password are not returned to their
initial factory defaults.
z The “Auto Adjust” item is returned to its initial default only when
RGB input is selected for the input source. All of the other items
are returned to their initial defaults regardless of the currently
selected input source.
Setting Name Input Setting Unit Description