Emerson Nfinity 208 - Manual (Page 24)

Operating Instructions
20
3.5 Main Menu
After initialization, the button will take you to the Main Menu. From here you may check on the
status of the UPS, review the event log and active alarms, configure your UPS and even receive
instructions on replacing modules. The Main Menu is divided into eight sub-menus as shown below:
Use the and buttons to select the desired menu item and press to access the appropriate
submenu.
Service Tools
Service Tools
UPS Test
Clear Failures
BM Cell Replacement
Reset Battery Stats
Reset Bypass Stats
Active Alarms
Active Alarms Message
UPS Configuration
UPS Configuration
Review Settings
Change Settings
Service Mode
Main Menu
> UPS Status
UPS Configuration
Display Date/Time
Event Log
Active Alarms
Transfer to Bypass
Module Replacement
Service Tools
UPS Status
UPS Status
Present Load
Redundant Status
Battery Status
Volts/Amps/kVA
UPS Frequency
Bypass Information
UPS Information
Module Information
Module Replacement
Module Replacement
Ctrl w/ Redundant
Ctrl w/o Redundant
Pwr w/ Redundant
Pwr w/o Redundant
Battery Module
Event Log
Event: xxx/xxx xx
event message
event message
DD/MMM/YYYY HH:MM:SS
Display Date/Time
Date/Time
xx/xx/xxxx xx:xx:xx
mm/dd/yyyy hh:mm:ss
Transfer to Bypass
Press for bypass
Press ESC to cancel