Casio PX-860 - Manual (Page 22)

English
Recording and Playback
EN-21
Each press of the SONG RECORDER button cycles
through the recording options in the sequence shown
below.
Recording to a Specific Song Track
After recording to either of the tracks of a song, you can
record to the other track while listening to playback
what you recorded in the first track.
1.
Press the SONG RECORDER button twice
so its lamp is flashing.
• At this time the L lamp will flash to indicate that the
Digital Piano is standing by for recording to Track 1.
2.
While holding down the FUNCTION button,
press the SONG RECORDER (L/R) button to
select the track you want to record.
• Make sure that the indicator lamp for the record track
is flashing.
Track 1: L lamp
Track 2: R lamp
Example: Track 1 selected
3.
Select the tone and effects (Track 1 only) you
want to use in your recording.
• Tone (page EN-7)
• Effects (page EN-10)
NOTE
• If you want the metronome to sound while you are
recording, configure the beat and tempo settings,
and then press the METRONOME button. See
“Using the Metronome” on page EN-12 for more
information.
4.
Start playing something on the keyboard.
• Recording will start automatically.
5.
To stop recording, press the START/STOP
a button.
• This will cause the SONG RECORDER button lamp
and the lamp of the track you recorded to change
from flashing to lit.
• To play back the track you just recorded, press the
START/STOP a button.
6.
After you are finished recording or playing
back, press the
SONG RECORDER button
so its lamp goes out.
Using the SONG RECORDER
Button
Lit Flashing Off
Playback
Standby
Record
Standby
Normal
PX860-ES-1A.indd 23 2014/06/27 12:26:12