Extron Electronics MAV Plus Series - Manual (Page 137)

Matrix Software, cont’d
CrossPoint 450 Plus and MAV Plus Switchers • Matrix Software 5-10
Date field
The Date field displays the current date in the Greenwich Mean Time zone. If
necessary, adjust the date as follows:
1 . Click in the Date field. A set date field appears with
the date in the format (M)M/(D)D/YYYY. Leading
zeroes are not used. The graphic cursor becomes a text cursor in the set date
field.
2 . Edit the field as desired to set the proper date. Leading zeroes are optional.
3 . Press the Tab key on the keyboard or click in another field to exit the set date
field.
4 . Click the Take button to make the date change take affect.
Time (local) field
The Time (local) field displays the current time in the local time zone. If necessary,
click on the Sync Time to PC button to set the switcher to your computer’s internal
time or else adjust the time manually as follows:
1 . Click in the time field. A set time field appears with
the date in the format HH:MM:SS
(00:00:00 to 23:59:59). The graphic cursor becomes a text cursor in the set time
field.
2 . Edit the field as desired to set the proper time. Remember to use 24-hour
time. Leading zeroes are optional.
3 . Press the Tab key on the keyboard or click in another field to exit the set time
field.
4 . Click the Take button to make the time change take affect.
Sync Time to PC button
Clicking the mouse on the Sync Time to PC button causes the computer you are
operating to send its internal time to the switcher in a set time command.
GMT (offset) field
The GMT field displays the amount of time, in hours and minutes, that the local
time varies from the GMT international time reference. If necessary, adjust the
offset as follows:
1 . Click in the GMT field. A set offset field appears with the offset in
the format ±HH:MM (–12:00 to +14:00). The graphic cursor
becomes a text cursor in the set offset field.
2 . Edit the field as desired to set the proper offset. Leading zeroes are optional.
Some time zones are on the half-hour (30 minutes).
3 . Press the Tab key on the keyboard or click in another field to exit the Set
Offset field.
4 . Click the Take button to make the offset change take affect.