Extron Electronics MAV Plus Series - Manual (Page 63)

Operation, cont’d
CrossPoint 450 Plus and MAV Plus Switchers • Operation 3-20
6 . Press and release the RGBHV (CrossPoint 450 Plus switchers) or Video
(MAV Plus switchers) button and the Audio button to toggle the RGBHV or
Video button on green and the Audio button either unlit or providing
background illumination (figure 3-27).
1 2 3 4 5 6 7 8 15 16
17 18 19 20 21 22 23 24 31 32
O
U
T
P
U
T
S
I / O
VIDEO AUDIO
The output buttons for outputs that are not tied to Input 5 are
either unlit or background illuminated.
The output buttons for outputs that are tied to Input 5 light
green to indicate RGBHV/Video ties (audio breakaway).
Press the RGBHV/
Video button to select it.
The button lights green
when selected.
Press the Audio
button to deselect it.
The button is unlit
or background
illuminated when
deselected.
Figure 3-27 — Deselect audio and select RGBHV or video to view RGBHV
or video only
If video ties are established for input 5, the output buttons for all video
outputs tied to input 5 light green. If no ties are established for input 5, all
output buttons return to either unlit or to background illumination.
7 . Press and release the View button to exit View-Only mode (figure 3-28).
All input buttons and output buttons
return to unlit or background illumination.
VIEW
Press the View button
to exit View-Only mode.
The View button returns to
unlit or background
illumination.
Figure 3-28 — Press the View button to exit View-Only mode