Extron Electronics MAV Plus Series - Manual (Page 59)

Operation, cont’d
CrossPoint 450 Plus and MAV Plus Switchers • Operation 3-16
4 . Press and release the output 4 button (figure 3-20).
1 2 3 4 5 6 7 8 15 16
17 18 19 20 21 22 23 24 31 32
O
U
T
P
U
T
S
C O N T R O L
PRESET ENTER ESC VIEW
Press and release the Output 4 button.
The button blinks red to indicate the pending change:
audio input will be untied.
The Enter button blinks
green to indicate the need to
confirm the change.
Figure 3-20 — Deselect the output
5 . Press and release the Enter button (figure 3-21).
ENTER
All input buttons and output buttons
return to unlit or background illumination.
Press the Enter button to
confirm the configuration
change.
The Enter button returns to
unlit or background
illumination.
Figure 3-21 — Press the Enter button
The current configuration (figure 3-22) is now:
• Video —
(Video only models) — Input 5 tied to output 1, output 3, output 4, and
output 8
(Video and audio models)
— Input 5 video tied to output 1, output 3,
output 4, and output 8
• Audio — (audio models) Input 5 audio tied to output 3 and output 8
Input 5 video tied
to outputs 1, 3, 4, and 8.
Input 5 audio tied
to outputs 3 and 8.
Input
Output
1
3
4
8
5
Video
Audio
Figure 3-22 — Example 3, final configuration, audio switcher