Operation, cont’d – Extron Electronics MAV Plus Series User Manual
Page 77
Operation, cont’d
CrossPoint 450 Plus and MAV Plus Switchers • Operation
3-34
4
.
One at a time
, press and hold the Output 3 and then the Output 4 buttons
(figure 3-53) for approximately 2 seconds until the buttons begin to blink. The
output 3 and output 4 video and audio signals are muted.
3
4
3
4
The button blinks amber to
indicate that the RGBHV or Video
and audio outputs are muted.
The button blinks amber to
indicate that the RGBHV or Video
and audio outputs are muted.
Mute outputs one at a time.
2 seconds
2 seconds
Press and hold the Output 3 button.
Press and hold the Output 4 button.
Figure 3-53 — Mute the outputs
If both RGBHV/video and audio are selected, the mute action toggles both the
video and audio outputs. If either the video output or the audio output is
already muted, the unmuted output is muted and the muted output is
unmuted.
If both RGBHV/video and audio are selected and only video is muted, the
output button flashes between green and amber. If only audio is selected, the
output button flashes between red and amber.
5
.
One at a time
, press and hold the Output 3 and then the Output 4 buttons
(figure 3-54) for approximately 2 seconds until the buttons lights steadily. The
output 3 and output 4 video and audio signals are unmuted.
3
4
3
4
Unmute outputs one at a time.
2 seconds
2 seconds
Press and hold the Output 3 button.
Press and hold the Output 4 button.
The button returns to its previous indication
(either lit green, background illuminated, or unlit)
to indicate that the outputs are unmuted.
The button returns to its previous indication
(either lit green, background illuminated, or unlit)
to indicate that the outputs are unmuted.
Figure 3-54 — Unmute the outputs
If both RGBHV/video and audio are selected, the unmute action toggles both
the video and audio outputs. If either the video output or the audio output is
already unmuted, the muted output is unmuted and the unmuted output is
muted.
6
.
Press and release the View button to exit View-Only mode (figure 3-55).
All input buttons and output buttons
return to unlit or background illumination.
VIEW
Press the View button
to exit View-Only mode.
The View button returns to
unlit or background
illumination.
Figure 3-55 — Press the View button to exit View-Only mode