Extron Electronics MAV Plus Series - Manual (Page 139)

Matrix Software, cont’d
CrossPoint 450 Plus and MAV Plus Switchers • Matrix Software 5-12
Mail Server IP Address field
The Mail Server IP Address field displays the IP address of the mail server that
handles the e-mail for the facility in which the CrossPoint 450 Plus or MAV Plus
switcher is installed.
Valid IP addresses consist of four 1-, 2-, or 3-digit numeric subfields separated by
dots (periods). Each field can be numbered from 000 through 255. Leading zeroes,
up to 3 digits total per field, are optional. Values of 256 and above are invalid.
Edit this field as follows:
1 . Click in the mail server IP address field. The graphic cursor becomes a text
cursor.
2 . Edit the IP address as desired.
3 . Press the Tab key on the keyboard or click in another field to exit the mail
server IP address field.
4 . Click the Take button to make the address change take affect.
Mail Server Domain Name field
The Mail Server Domain Name field displays the domain name that the
CrossPoint 450 Plus or MAV Plus switcher uses to log on to the e-mail server.
Standard domain conventions (such as nnnnn@xxx.com) apply.
The following characters are invalid in a domain name: {space} + ~ , = ‘ [ ]
{ } < > ’ “ ; : | \ and ?. The @ character is only acceptable as the lead-in
to the domain name (such as @folklore.net).
Edit this field as follows:
1 . Click in the Mail Server Domain Name field. The graphic cursor becomes a
text cursor.
2 . Edit the name as desired.
3 . Press the Tab key on the keyboard or click in another field to exit the Mail
Server Domain Name field.
4 . Click the Take button to make the name change take affect.
E-mail Addressee fields
The eight E-mail Addressee fields permit the administrator to identify the e-mail
addresses of the personnel to whom the CrossPoint 450 Plus or MAV Plus switcher
e-mails notification of its failure and repair status. Figure 5-8 shows a typical e-mail
from the switcher.
Figure 5-8— Typical CrossPoint 450 Plus e-mail