Extron Electronics MAV Plus Series - Manual (Page 159)

HTML Operation, cont’d
CrossPoint 450 Plus and MAV Plus Switchers • HTML Operation 6-8
Passwords page
Access the Passwords page (figure 6-6) by clicking the Passwords link on the
System Settings page.
Select System Settings.
Select Firmware Upgrade.
Select Email Settings.
Figure 6-6 — Passwords page
The fields on the Passwords page are for entering and verifying administrator and
user passwords. Passwords are case sensitive and are limited to 12 uppercase and
lowercase alphanumeric characters. Each password must be entered twice; once in
the Password field and then again in the Re-enter Password field. Characters in
these fields are masked by asterisks (*****). If you do not want to password protect
an access level, leave the Password field and the Re-Enter password field blank.
After entering the desired password in both fields, click the Submit button.
An administrator password must be created before a user password can be
created.
To clear an existing password so that no password is required, erase the existing
password and enter a space in the Password and Re-enter Password fields and click
the Submit button.