Extron Electronics MAV Plus Series - Manual (Page 160)

6-9 CrossPoint 450 Plus and MAV Plus Switchers • HTML Operation
Email Settings page
Reach the Email Settings page (figure 6-7) by clicking the Email Settings link on the
System Configuration page. The Email Settings page has fields for setting up the
switcher’s e-mail notification capabilities. For the e-mail settings and for each row
of the e-mail notification settings, click the Edit button to make the fields available
for editing. The button changes to Save. After editing the settings associated with
the Edit/Save button, click the Save button.
Refresh.
Select Firmware Upgrade.
Select System Configuration.
Figure 6-7 — Email Settings page
Mail IP Address field
The Mail IP Address field displays the IP address and the domain name of the mail
server that handles the e-mail for the facility in which the CrossPoint 450 Plus or
MAV Plus switcher is installed.
Valid IP addresses consist of four 1-, 2-, or 3-digit numeric subfields separated by
dots (periods). Each field can be numbered from 000 through 255. Leading zeroes,
up to 3 digits total per field, are optional. Values of 256 and above are invalid.
Domain Name field
The Domain Name field displays the domain name that the CrossPoint 450 Plus or
MAV Plus switcher uses to log on to the e-mail server. Standard domain name
conventions (for example: nnnnn@xxx.com) apply.
The following characters are invalid in a domain name: {space} + ~ , = ‘ [ ]
{ } < > ’ “ ; : | \ and ?. The @ character is only acceptable as the lead-in
to the domain name (such as @folklore.net).